-40%
3.2
3.2
3.2
3.2
3.2

3.2" LCD Touch + 3.2 inch Shield + Mega 2560 R3 with usb cable for Arduino kit

$ 19.18

Availability: 203 in stock
  • Refund will be given as: Money Back
  • Item must be returned within: 30 Days
  • MPN: Does Not Apply
  • All returns accepted: Returns Accepted
  • Return shipping will be paid by: Buyer
  • Brand: Unbranded/Generic
  • Restocking Fee: No
  • Condition: New

    Description

    3.2 '' TFT LCD Display:
    - 3.2 inch, 240 * 320 resolution, with TFT touch screen;
    - Display driver chip for the ILI9341, touch screen driver chip for the XPT2046;
    - 16bit parallel interface for display interface, support 6800 and 8080 bus interface, support STM32 FSMC bus interface, scraper fast;
    - touch screen interface for the SPI interface, less data lines, the drive is simple;
    - low voltage drop onboard low current LDO regulator, compatible with 5V and 3.3V power supply;
    - Onboard PWM backlight control circuit, can support IO control and PWM dimming control;
    - module with SD deck, do digital photo frame and other experiments;
    - reserved SPI FLASH pad, you can expand the welding font chip;
    - support horizontal screen display and vertical screen display, support screen segmentation display;
    - support 262 million color RGB display, display good picture quality;
    - screen controller comes with 172800 bytes of graphics display data storage area;
    - interface compatible with positive point atomic series development board interface;
    - machine chip production, hardware, stable and reliable;
    TFT LCD Mega Shield :
    Function Description:
    Because TFT01 LCD is working in 3.3V voltage, so can not be used directly on top of standard motherboards, so in order to make TFT01 LCD
    Compatible for use on standard motherboard design section TFT Shield, can be directly plugged into the motherboard using TFT01 LCD
    Modules.
    TFT01 LCD
    16 can support the current mode, since there is sufficient Mega2560 IO, while using only a touch screen interface or SD card interface, like in the case of face 328S will not exist.
    Mega2560 board:
    CH340G Replace ATMEGA16U2
    Microcontroller:ATmega2560
    Operating Voltage:5V
    Input Voltage (recommended):7-12V
    Input Voltage (limits):6-20V
    Digital I/O Pins:54 (of which 15 provide PWM output)
    Analog Input Pins:16
    DC Current per I/O Pin:40 mA
    DC Current for 3.3V Pin:50 mA
    Flash Memory:256 KB of which 8 KB used by bootloader
    SRAM:8 KB
    EEPROM:4 KB
    Clock Speed:16 MHz
    CH340G Driver Download link : http://www.5v.ru/ch340g.htm
    IDE of ard uino Download link :  http://arduino.cc/en/Main/Software
    Package Included:
    1 X Mega 2560 R3 with usb cable
    1 X 3.2 inch TFT shield
    1 X LCD Touch 3.2 inch