6 ft Beveled Aluminum Load Track, Trailer / Truck Tiedown - 4 Pieces

Description

PLEASE NOTE
:
Stated shipping rates are for the
Continental United States
only. Please contact us for other shipping charges.
International shipping
is done thru eBay's Global Shipping Program. International shipping is not available to all countries because of weight and length restrictions. Please check the requirements or as you process the transaction you'll be informed.
6 ft Aluminum Load Track - 4 Pieces
Beveled
8,000 lb.cap.
**** All ALT is
cardboard packaged
to minimize shipping damage.
This listing weighs 18 lbs. and all packages longer than 4 ft incur a one time UPS/FedEx imposed oversize fee of .00. This fee is already included in the shipping price.
Stainless steel
Hardware Kits
(lock-nuts, bolts, & washers) are available in our eBay store.
This popular tie down system was developed by the airline industry. It has become popular with motorcycle enthusiasts looking for a versatile method to tie down their motorcycle when
transporting on a trailer.
The track allows for attachment adjustment every inch. The beveled style is surface mounted. In the middle of the floor a beveled track is favorable to reduce the tripping hazard. If you are mounting track on the perimeter of a trailer there isn't much of a chance for interference therefore the rectangular style will work just as well.
Either style track works well when attached to the top rail of a
pickup trucks'
bed. It can be installed on the top or the side of the rail for cargo stability. It is not recommended to secure a motorcycle to the rail of a trucks' bed. We prefer anchoring to the floor.
It is not recommended to pull the fittings at an angle greater than 45 degrees. As a rule of thumb you lose about half your rating at a 45 degree angle.
*Exact sizes
are available at no additional charge. To determine the cost we round off to the next even foot.
SPECIFICATIONS:
• The track is a 6061-T6 alloy extrusion.
• Predrilled 1/4" countersunk holes are on 4" center.
• The track measures 1-3/4" wide x 1/2" thick.
• 6 ft. weighs 4.45 lbs.
Suggested hardware:
1/4" flat cap socket bolts, steel or stainless steel. These are the bolts that have tapered heads and are tightened with allen wrenches. We like to use fender washers and nylon locking nuts underneath.
Please contact us at
856-374-4740
with any questions or comments.
Telephone customer service hours:
Mon-Thurs 7am-9pm EST Fri-Sat 7am-5pm