6 ft Rectangular Aluminum Load Track, Trailer / Truck Tiedown - 2 Pieces

Description

PLEASE NOTE
:
Stated shipping rates are for the
Continental United States
only. Please contact us for other shipping charges.
International shipping
is not available to all countries because of weight and length restrictions. Please check the requirements or as you process the transaction you'll be informed.
6ft Aluminum Load Track - 2 Pieces
Rectangular
8,000 lb.cap.
**** All ALT is
cardboard packaged
to minimize shipping damage.
This listing weighs 9 lbs. and all packages longer than 4 ft incur a one time UPS/FedEx imposed oversize fee of .00. This fee is already included in the shipping price.
Stainless  steel
Hardware  Kits
(lock-nuts, bolts, & washers) are available in our eBay store.
This popular tie down system was developed by the airline industry. It has become popular with motorcycle enthusiasts looking for a versatile method to tie down their motorcycle when
transporting on a trailer.
The track allows for attachment adjustment every inch. It can be surface or flush mounted. Generally when the track is at the perimeter of the trailer surface mounting is fine - not much of a chance for interference. In the middle of the floor a flush mount is favorable but not necessary.
Either style track works well when attached to the top rail of a
pickup trucks'
bed. It can be installed on the top or the side of the rail for cargo stability. It is not recommended to secure a motorcycle to the rail of a trucks' bed. We prefer anchoring to the floor.
It is not recommended to pull the fittings at an angle greater than 45 degrees. As a rule of thumb you lose about half your rating at a 45 degree angle.
*Exact sizes
are available at no additional charge. To determine the cost we round off to the next even foot.
Suggested hardware:
1/4" flat cap socket bolts, steel or stainless steel. These are the bolts that have tapered heads and are tightened with allen wrenches. We like to use fender washers and nylon locking nuts underneath.
SPECIFICATIONS:
• The track is a 6061-T6 alloy extrusion.
• Predrilled 1/4" countersunk holes are on 4" center.
• The track measures 1-3/8" wide x 1/2" thick.
• 8 ft. weighs 5.36
l
bs.
Please contact us at
856-374-4740
with any questions or comments.
Telephone customer service hours:
Mon-Thurs 7am-9pm EST Fri-Sat 7am-5pm