BARKSDALE HEIGHT CONTROL LEVELING VALVE, 52321 SERIES~ TRUCK, TRAILER, COACH, 6"

Description

NEW BARKSDALE LEVELING VALVE exactly as pictured
HENDRICKSON STYLE
P/N 52321-Q285
RIDE HEIGHT LEVELING VALVE FOR TRUCKS, RV, TRAILERS
ARM LENGTH - 6"
PORTS ARE 1/4"NPT
VALVE IS 2" X 2" X  1-1/4" DEEP
THIS LEVELING VALVE CAN BE USED ON THE LEFT OR RIGHT SIDE, OR CAN BE USED TO CONTROL TWO AIR BAGS.
MAINTAINS DESIRED RIDE HEIGHT WITH INCREASED OR DECREASED LOADS.
This valve has 4 ports, 1 inlet, 1 exhaust, and 2 out to air bags
The 52321 SERIES Air Suspension Valve utilizes Barksdale’s
patented Shear-Seal® technology to accurately control
suspension height in commercial and recreational vehicle
applications. Shear-Seal® has become the industry
leader through superior performance and long life, even
under the most demanding conditions.
Barksdale height control valves feature proportional
response
. These features combine to minimize air
consumption without the use of inaccurate and failure
prone time delay elements found in competing products.
The Barksdale
valve’s compact design
make it a perfect fit on any suspension.
Applications:
Tractor -
Primary Suspension,
Cab Suspension,
Front Suspension
Trailer,
Bus,
RV
Shear-Seal® Technology provides superior
performance and durability.
Precise dead band optimizes ride height control.
Proportional flow reduces vehicle air consumption
120 or 350 l/min (4.2 to12.4 CFM) peak flow balances
suspension response and air use.
Dual outlet ports for simplified hose routings.
Compact size and flexible design fits any application.
Seal Type Shear-Seal®.
Operating
Pressure 130 PSI (9 bar) Maximum.
Operating
Temperature
-40ºF to +150ºF
(-40ºC to +65ºC).
*DOT approved
Dual delivery ports (BAG PORTS).
Mounting Studs 1/4-20 UNF.
Linkage Mounting Hole
1/4".
Maximum Handle
Movement
+/- 75º For fill or exhaust
Materials Of Construction:
Body:
Anodize aluminum
Housing:
Engineered plastics
Arm:
Zinc plated steel
InteRnal Elements:
Stainless steel
and hard anodized aluminum
Seals:
Buna-N
NPT (National Pipe Taper) is the accepted industry designation for pipe size fittings, not the actual measured size. To determine the NPT size for an engine anode’s brass plug, measure the outside diameter (OD) of the threaded section of the plug then select the corresponding NPT size.
For example, if a plug’s thread OD measures around 1/2", the corresponding NPT size is 1/4".
OD of Threads of Plug
3/8"
1/2"
5/8"
3/4"
1"
1-3/8"
1-5/8"
NPT Size of  Plug
1/8"
1/4"
3/8"
1/2"
3/4"
1"
1-1/4"
SHIPPING IS
FREE
.00
SHIPPING TO CANADA &
.00
EACH ADDITIONAL
INTERNATIONAL SHIPPING
$
20.00
&
.00
EACH ADDITIONAL